BKMMC - PQ HEAT SINK COMPOUND KS21343 L1
- MSDS: BKMMC
- Manufacturer: AMERICAN OIL AND SUPPLY CO
- Product Name: PQ HEAT SINK COMPOUND KS21343 L1
- National Stock Number: 6850-00N014723
Product Identification
Product ID:PQ HEAT SINK COMPOUND KS21343 L1
MSDS Date:04/01/1988
FSC:6850
NIIN:00N014723
MSDS Number: BKMMC
Responsible Party
NEWARK, NJ 07105
US
Emergency Phone: 201-589-0250
Cage: 92895
Contractor
Telephone: 201-589-0250
Cage: 92895
Ingredients
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN AND EYE EFFECTS:NONE.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:EYES/SKIN:MILD IRRITATION. INGEST:NAUSEA,
VOMITING, DIARRHEA, GASTROINTESTINAL IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH AREA W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING.
LAUNDER PRIOR TO REUSE. EYES:FLUSH W/LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES, GET MD. INGEST:DO NOT INDUCE VOMITING, CALL MD.
NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON. INHAL:REMOVE
TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTF RESP), CALL MD .
Fire Fighting
Flash Point Method:COC
Flash Point:500F,260C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SHOVEL PASTE INTO CONTAINER. REMOVE RESIDUE
WITH SOLVENT COMPATIBLE FOR USE IN AREA OF SPILL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:EMPTY CNTNRS OF PROD CAN BE HAZARDOUS DUE TO
RETENTION OF RESIDUES/VAPORS. ALL CHEMICAL PRODS SHOULD BE HANDLED
AS TO PREVENT CONSTANT/REPEATED CONTACT. APPROPRIATE EYE, SKIN &
BREATHING PROTECTION SH OULD BE EMPLOYED AT ALL TIMES.
Exposure Controls
Respiratory Protection:NONE NORMALLY NEEDED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:TO AVOID RPTD/PRLNGD SKIN CONTACT WEAR
IMPERVIOUS CLOTHING & BOOTS AS APPLICABLE.
Work Hygienic Practices:MINIMIZE SKIN CONTACT WITH ALL LUBRICANTS. WASH
WITH SOAP & WATER PRIOR TO EATING, DRINKING, SMOKING OR USING
WASHROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>500F,>260C
Vapor Pres:<0.1
Spec Gravity:2.7
Evaporation Rate & Reference:<0.01
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE, CREAMY PASTE, MILD ODOR.
Percent Volatiles by Volume:NEGL
Stability
STRONG OXIDANTS (CHLORINE & OXYGEN), STRONG ACIDS OR ALKALIES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:INCINERATE ABSORBED MATERIAL OR DISPOSE OF I/A/W
YOUR LOCAL, STATE AND FEDERAL REGULATIONS GOVERNING YOUR OPERATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.